Dev C Error Lglut32 No Such File Or Directory

utilsmodule.c:1:20: fatal error: Python.h: No such file or directory compilation terminated. I have tried all the suggested solutions over the internet but the problem still exists. I have no problem with Python.h. GCC reports missing files using the format gcc: error: filename: No such file or directory and in your case, the filename is blank. Can you obtain a fresh clone on a new directory and re-run the setup script? Maybe some unnecessary files are left from previously failed installation attempts. Filed Under: Troubleshooting Errors Tagged With: curses.h error, fatal error: curses.h: No such file or directory, make command failed with curses.h file not found If you like my tutorials and if they helped you in any way, then. This article looked at the 'No such file or directory' message of the GCC C compiler. If you get this message you should: Remember that the compiler is always right in situations like this. Look very closely at the file name to make sure it is correct. Avoid naming file using mixed-case or special characters.

2020-12-16

The Question :

I am trying to build a shared library using a C extension file but first I have to generate the output file using the command below:

After executing the command, I get this error message:

I have tried all the suggested solutions over the internet but the problem still exists. I have no problem with Python.h. I managed to locate the file on my machine.

The Answer 1

2506 people think this answer is useful

Looks like you haven’t properly installed the header files and static libraries for python dev. Use your package manager to install them system-wide.

For apt (Ubuntu, Debian…):

For yum (CentOS, RHEL…):

For dnf (Fedora…):

Error

For zypper (openSUSE…):

For apk (Alpine…):

For apt-cyg (Cygwin…):

The Answer 2

On Ubuntu, I was running Python 3 and I had to install

If you want to use a version of Python that is not linked to python3, install the associated python3.x-dev package. For example:

The Answer 3

For Python 3.7 and Ubuntu in particular, I needed

sudo apt install libpython3.7-dev

.I think at some point names were changed from pythonm.n-dev to this.

for Python 3.6, 3.8, and 3.9 similarly:

sudo apt install libpython3.6-devsudo apt install libpython3.8-devsudo apt install libpython3.9-dev

The Answer 4

Two things you have to do.

Install development package for Python, in case of Debian/Ubuntu/Mint it’s done with command:

Second thing is that include files are not by default in the include path, nor is Python library linked with executable by default. You need to add these flags (replace Python’s version accordingly):

In other words your compile command ought to be:

The Answer 5

If you are using a Raspberry Pi: Free download game build a lot 3 full version.

The Answer 6

on Fedora run this for Python 2:

and for Python 3:

The Answer 7

Dev C Error Lglut32 No Such File Or Directory Linux

If you are using tox to run tests on multiple versions of Python, you may need to install the Python dev libraries for each version of Python you are testing on.

The Answer 8

Make sure that the Python dev files come with your OS.

You should not hard code the library and include paths. Instead, use pkg-config, which will output the correct options for your specific system:

You may add it to your gcc line:

The Answer 9

Solution for Cygwin

You need to install the package python2-devel or python3-devel, depending on the Python version you’re using.

You can quickly install it using the 32-bit or 64-bitsetup.exe (depending on your installation) from Cygwin.com.

Example (modify setup.exe‘s filename and Python’s major version if you need):

You can also check my other answer for a few more options to install Cygwin’s packages from the command-line.

The Answer 10

In AWS API (centOS) its

The Answer 11

For me, changing it to this worked:

I found the file /usr/include/python2.7/Python.h, and since /usr/include is already in the include path, then python2.7/Python.h should be sufficient.

You could also add the include path from command line instead – gcc -I/usr/lib/python2.7 (thanks @erm3nda).

The Answer 12

AWS EC2 install running python34:

sudo yum install python34-devel

The Answer 13

If you use a virtualenv with a 3.6 python (edge right now), be sure to install the matching python 3.6 dev sudo apt-get install python3.6-dev, otherwise executing sudo python3-dev will install the python dev 3.3.3-1, which won’t solve the issue.

The Answer 14

In my case, what fixed it in Ubuntu was to install the packages libpython-all-dev (or libpython3-all-dev if you use Python 3).

The Answer 15

It’s not the same situation, but it also works for me and now I can use SWIG with Python3.5:

I was trying to compile:

With Python 2.7 works fine, not with my version 3.5:

existe_wrap.c:147:21: fatal error: Python.h: No existe el archivo o el directorio compilation terminated.

After run in my Ubuntu 16.04 installation:

Now I can compile without problems Python3.5:

The Answer 16

I also encountered this error when I was installing coolprop in ubuntu.

Dev C Error Lglut32 No Such File Or Directory Enquiries

For ubuntu 16.04 with python 3.6

If ever this doesn’t work try installing/updating gcc lib.

The Answer 17

try apt-file. It is difficult to remember the package name where the missing file resides. It is generic and useful for any package files.

For example:

Dev C Error Lglut32 No Such File Or Directory

Now you can make an expert guess as to which one to choose from.

The Answer 18

I managed to solve this issue and generate the .so file in one command

The Answer 19

For CentOS 7:

I followed the instructions here for installing python3.6 on several VMs: https://www.digitalocean.com/community/tutorials/how-to-install-python-3-and-set-up-a-local-programming-environment-on-centos-7and was then able to build mod_wsgi and get it working with a python3.6 virtualenv

The Answer 20

For the OpenSuse comrades out there:

The Answer 21

If you’re using Python 3.6 on Amazon Linux (based on RHEL, but the RHEL answers given here didn’t work):

The Answer 22

  1. You must install the Python development files on your operating system if the Python provided with your operating system does not come with them. The many answers on this question show the myriad ways this can be achieved on different systems.

  2. When you have done so, the problem is telling the compiler where they’re located and how to compile against them. Python comes with a program called python-config. For compilation, you need the --includes output and for linking a program against the Python library (embedding Python into your program) the --ldflags output. Example:

The python-config program can be named after the Python versions – on Debian, Ubuntu for example these can be named python3-config or python3.6-config.

The Answer 23

This error occurred when I attempted to install ctds on CentOS 7 with Python3.6. I did all the tricks mentioned here including yum install python34-devel. The problem was Python.h was found in /usr/include/python3.4m but not in /usr/include/python3.6m. I tried to use --global-option to point to include dir (pip3.6 install --global-option=build_ext --global-option='--include-dirs=/usr/include/python3.4m' ctds). This resulted in a lpython3.6m not found when linking ctds.

Finally what worked was fixing the development environment for Python3.6 needs to correct with the include and libs.

Python.h needs to be in your include path for gcc. Whichever version of python is used, for example if it’s 3.6, then it should be in /usr/include/python3.6m/Python.h typically.

The Answer 24

Sure python-dev or libpython-all-dev are the first thing to (apt )install, but if that doesn’t help as was my case, I advice you to install the foreign Function Interface packages by sudo apt-get install libffi-dev and sudo pip install cffi.

This should help out especially if you see the error as/from c/_cffi_backend.c:2:20: fatal error: Python.h: No such file or directory.

The Answer 25

It often appear when you trying to remove python3.5 and install python3.6.

So when using python3 (which python3 -V => python3.6) to install some packages required python3.5 header will appear this error.

Resolve by install python3.6-dev module.

The Answer 26

Sometimes even after installing python-dev the error persists,Check for the error if it is ‘gcc’ missing.

First download as stated in https://stackoverflow.com/a/21530768/8687063, then install gcc

For apt (Ubuntu, Debian…):

For yum (CentOS, RHEL…):

For dnf (Fedora…):

For zypper (openSUSE…):

For apk (Alpine…):

The Answer 27

This means that Python.h isn’t in your compiler’s default include paths. Have you installed it system-wide or locally? What’s your OS?

You could use the -I<path> flag to specify an additional directory where your compiler should look for headers. You will probably have to follow up with -L<path> so that gcc can find the library you’ll be linking with using -l<name>.

The Answer 28

try locate your Python.h:

if not found, then install python-dev or python3-dev; else include the correct header path for compiler:

Compiling graphics codes on CodeBlocks IDE shows an error: “Cannot find graphics.h”. This is because graphics.h runs is not available in the library folder of CodeBlocks. To successfully compile graphics code on CodeBlocks, setup winBGIm library.

How to include graphics.h in CodeBlocks ?

Please follow below steps in sequence to include “graphics.h” in CodeBlocks to successfully compile graphics code on Codeblocks.
Step 1 : To setup “graphics.h” in CodeBlocks, first set up winBGIm graphics library. Download WinBGIm from http://winbgim.codecutter.org/ or use this link.

Step 2 : Extract the downloaded file. There will be three files:

  • graphics.h
  • winbgim.h

    • Dev C Error Lglut32 No Such File Or Directory File

  • libbgi.a

    • Step 3 : Copy and paste graphics.h and winbgim.h files into the include folder of compiler directory. (If you have Code::Blocks installed in C drive of your computer, go through: Disk C >> Program Files >> CodeBlocks >> MinGW >> include. Paste these two files there.)


    Step 4 : Copy and paste libbgi.a to the lib folder of compiler directory.

    Step 5 : Open Code::Blocks. Go to Settings >> Compiler >> Linker settings.

    Step 6 : In that window, click the Add button under the “Link libraries” part, and browse.
    Select the libbgi.a file copied to the lib folder in step 4.

    Step 7 : In right part (ie. other linker options) paste commands

    -lbgi -lgdi32 -lcomdlg32 -luuid -loleaut32 -lole32

    Step 8 : Click Ok

    Step 9 : Try compiling a graphics.h program in C or C++, still there will be an error. To solve it, open graphics.h file (pasted in include folder in step 3) with Notepad++. Go to line number 302, and replace that line with this line : int left=0, int top=0, int right=INT_MAX, int bottom=INT_MAX,

    Step 10 : Save the file. Done !

    Note : Now, you can compile any C or C++ program containing graphics.h header file. If you compile C codes, you’ll still get an error saying: “fatal error: sstream : no such file directory”.

    For this issue, change your file extension to .cpp if it is .c

    Rated as one of the most sought after skills in the industry, own the basics of coding with our C++ STL Course and master the very concepts by intense problem-solving.

    Recommended Posts:

    If you like GeeksforGeeks and would like to contribute, you can also write an article using contribute.geeksforgeeks.org or mail your article to contribute@geeksforgeeks.org. See your article appearing on the GeeksforGeeks main page and help other Geeks.

    Please Improve this article if you find anything incorrect by clicking on the 'Improve Article' button below.


    Comments are closed.